Moffat MTE18GTKWW Manuel D'utilisation page 12

REVERSING THE DOOR SWING
REVERSING DOOR HANDLES –
5
TRANSFER FREEZER DOOR HANDLE
TO THE LEFT SIDE
1. Loosen the set screws on the handle with 1/8"
wrench and remove handle.
2. Remove the fasteners from the surface of the freezer
door, and cover the new vacant holes. .
3. Remove the plug buttons from the surface of the right
side of the refrigerator door and insert the fasteners
with a Phillips screwdriver.
4. Attach handle to freezer door with screws at the top
of the handle. Use 1/8" allen wrench to tighten the set
screws.
NOTE: Do not over-tighten.
Installation Instructions
(CONT.)
12
REVERSING DOOR HANDLES –
6
TRANSFER REFRIGERATOR DOOR
HANDLE TO THE LEFT SIDE
1. Loosen set screws on handle with 1/8" wrench
and remove handle.
2. Remove the fastener from the surface of the
refrigerator door, and cover the new vacant hole
with the plug from the opposite side.
3. Insert the fastener into the surface of the right side
of the freezer door with a Phillips screwdriver.
4. Attach the handle to the freezer door with set screws.
Use 1/8" allen wrench to tighten the set screws.
NOTE: Do not over-tighten.
1" = 2.5 cm; 1' = 0.3 m