Secure Dishwasher In Cabinet Opening - Kenmore W10789009A Instructions D'installation

Check that dishwasher is still level front-to-back and side-to-
side in cabinet opening.
Open dishwasher door, remove lower dish rack, and place towel
over pump assembly and lower spray arm of dishwasher. This
will keep screws from falling into pump area when you are
securing the dishwasher.
NOTE: Do not drop screws into bottom of dishwasher.

Secure Dishwasher in Cabinet Opening

Secure dishwasher to countertop
Locate brackets on top of dishwasher and secure dishwasher to
countertop with two, #10 x ¹⁄₂" Phillips-head screws (included).
The dishwasher must be secured to keep it from shifting when
door is opened.
Side mount dishwasher to cabinet
NOTE: If side mounting dishwasher to cabinet, you must drill
pilot holes in cabinet to avoid splitting the wood.
Locate brackets on side of dishwasher and secure dishwasher to
cabinet with two, #10 x ¹⁄₂" Phillips-head screws (included). The
dishwasher must be secured to keep it from shifting when door is
opened.
Check that top of door does not contact screws, brackets or
countertop. If it does, adjust leveling legs.
Open door and check that space between dishwasher cabinet
opening and tub is equal on both sides. If spacing is not equal,
loosen bracket screws secured and shift tub. Tighten bracket
screws.
21