Description Of Symbols - Silverline 867882 Mode D'emploi

GB
Introduction
Thank you for purchasing this Silverline tool . This manual contains information necessary
for safe and effective operation of this product . This product has unique features and, even if
you are familiar with similar products, it is necessary to read this manual carefully to ensure
you fully understand the instructions . Ensure all users of the tool read and fully understand
this manual .

Description of Symbols

The rating plate on your tool may show symbols . These represent important information about the
product or instructions on its use .
Wear hearing protection .
Wear eye protection .
Wear breathing protection .
Wear head protection .
Read instruction manual .
Caution!
Conforms to relevant legislation and safety standards .
4
Original Instructions
Specification
Model: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .867882
Applicable standards: . . . . . . . . . . . . . . . . . . . . . . . . EN 354 (Fall protection lanyards)
EN 358 (Work positioning belts and lanyards)
Material: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Karabiner: steel grade 35CrMo
Maximum strength: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25kN
Temperature range: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40 to +80°C
Dimensions
(max working length x rope diameter): . . . . . . . . . . . . . . . . . . . . . . . . . . 1800 x 12mm
Net weight: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 .79kg
As part of our ongoing product development, specifications of
Silverline products may alter without notice .
Carefully read and understand these instructions and any label attached to the tool
before use. Keep these instructions with the product for future reference. Ensure all persons
who use this product are fully acquainted with these instructions.
Safety Instructions for Height Safety
Equipment
WARNING: Activities involving the use of this equipment are inherently dangerous . ALWAYS
carry out a risk assessment before work commences, including rescue arrangements .
WARNING: Specific training is essential before using this equipment. It must only be used by
competent and responsible individuals, taking care not exceeding the limitations of the equipment .
WARNING: Failure to adhere to any warnings and recommendations given in these
instructions, may result in severe injury or even death! When using this equipment you personally
assume all risks and responsibilities for all damage, injury or death which may occur during or
following incorrect use of this equipment . You are responsible for your own actions and decisions . If
you are unable, or not in a position to assume this responsibility or to accept these risks, DO
NOT USE THIS EQUIPMENT.
a) NEVER use equipment that has exceeded its shelf and/or service life.
b) This product MUST NOT be stressed beyond its strength rating.
c) DO NOT use components of fall arrest gear outside its limitations, or for applications
which they were not specifically designed for.
d) Avoid impacts and rubbing against abrasive surfaces during use, transport and storage .
e) DO NOT use connectors with manual locking mechanisms in areas where they are
frequently opened and closed.
f) Ensure locking mechanisms and safety devices engage securely and connectors are fully
closed and locked before use .
g) NEVER combine components that are not recommended by the manufacturer as being
compatible. One item may interfere with the safe function of another, jeopardising the function
of the system as a whole .
h) NEVER attach a fall arrest system to an anchorage if you are unsure about the strength
and condition of the anchorage.
i) Take into account the length of every single component of a fall arrest system, including
the connectors, when determining the total length of the system.
j) The clearance under the user must be sufficient to prevent him from striking an obstacle
in the event of a fall.
k) DO NOT allow any part of a fall arrest, work positioning or restraint system to come into
contact with sharp edges or abrasive surfaces during use. Reposition if necessary or choose
an alternative anchorage .
l) Any component of a fall arrest system must be individually inspected according to the
manufacturer's recommendations and procedures. After assembly, the system must be
inspected as a functional unit .
m) Any kind of repair or modification of this equipment is strictly PROHIBITED.
n) DO NOT tie knots in harnesses, lanyards and ropes. DO NOT allow equipment to become
tangled .
o) Equipment that has been exposed to extreme conditions, failed an inspection or has been
used to arrest a fall must be retired and destroyed. Never expose items made with synthetic
fibre components to direct flames.
p) DO NOT use shock absorbers that have been partially deployed, or when the plastic sheath
is damaged .
q) Destroy retired equipment immediately, to prevent further use.
EN 362 (Karabiners)
EN 355 (Energy Absorbers)
Scaffold hook: steel grade C45
Rope: Nylon
Thimble: Polyethylene
Absorber: Polyester