Symbols - Ryobi RY254BC Manuel D'utilisation

The following signal words and meanings are intended to explain the levels of risk associated with this product.
SYMBOL SIGNAL
DANGER:
WARNING:
CAUTION:
NOTICE:
Some of the following symbols may be used on this product. Please study them and learn their meaning for safe
operation of this product.
SYMBOL
Safety Alert
Read Operator's Manual
Eye and Hearing Protection
Keep Bystanders Away
Ricochet
Blade Thrust
Hot Surface
Wear Gloves
Wear Safety Footwear
Gasoline and Lubricant

SYMBOLS

MEANING
Indicates a hazardous situation, which, if not avoided, will result in death or
serious injury.
Indicates a hazardous situation, which, if not avoided, could result in death or
serious injury.
Indicates a hazardous situation, that, if not avoided, may result in minor or
moderate injury.
(Without Safety Alert Symbol) Indicates information considered important, but
not related to a potential injury (e.g. messages relating to property damage).
NAME
4 — English
EXPLANATION
Indicates a potential personal injury hazard.
To reduce the risk of injury, user must read and under-
stand operator's manual before using this product.
Always wear eye protection with side shields marked to
comply with ANSI Z87.1 along with hearing protection
when operating this equipment.
Keep all bystanders at least 50 ft. away.
Thrown objects can ricochet and result in personal injury
or property damage.
Beware of blade thrust. Products authorized for blade use
will display this symbol to warn of blade thrust.
To reduce the risk of injury or damage, avoid contact
with any hot surface.
Wear non-slip, heavy-duty protective gloves when
handling this equipment.
Wear non-slip safety footwear when using this
equipment.
Use unleaded gasoline intended for motor vehicle use
with an octane rating of 87 [(R + M) / 2] or higher. This
product is powered by a 2-cycle engine and requires
pre-mixing gasoline and 2-cycle lubricant.