Trevi HCV 1035 BT Mode D'emploi page 16

ENGLISH HCV 1035 BT
• Select a good location. If not, accidents may occur or the unit may get damaged.
Driving screws: Installing the unit:
You may hang it on the wall. Use supplied or proper screws. See below for size and type.
Installing the unit:
Fix the pattern paper to the wall in horizontal position as below.
Make a hole on the wall following the screw point marks on the pattern paper by using a drill.
Fix a wall mount plug into the hole using a hammer, until it is flush with the wall surface.
Fasten the screws to the wall as shown below. (Total screws: 2 ps)
Hang the unit onto the screws.
16