Miranda ASD-711i Notice D'installation Et D'utilisation page 22

All manuals and user guides at all-guides.com
ASD ASD- - 711i/712i 711i/712i
3.14 Menu ALRM
Follow these steps to disable or enable alarm of an audio channel. Once disabled, alarms are
not transmitted to ICP-S.
Procedure
• Press [ + ] or [ - ] to display the ALRM menu,
• Press [ SEL ] to display the selected channel , use [ + ] or [ - ] to scroll through the available
channels. (ASD-712i only)
• Press [ SEL ] to store the channel, use [ + ] or [ - ] to select OFF or ON
• Press [ SEL ] to store the new parameter, and to return to the previous menu
• Or press [ ESC ] to return to the previous menu without updating the parameter.
• To turn off the display, press [ ESC ].
3.15 Menu FACT
It may be necessary, at times, to reset all parameters to their original values programmed during
manufacturing. The table below lists the default values. To perform factory reset follow these
steps.
Procedure
• Press [ + ] or [ - ] displays the FACT menu,
• Press [ SEL ] to enter the FACT menu. No is displayed
• Press [+ ] to display YES.
• Press [ SEL ] to store the new parameter, and to return to the previous menu
• Or press [ ESC ] to return to the previous menu without updating the parameter.
• To turn off the display, press [ ESC ].
LVL
DITH
MUTE
TEST
REF
FREQ
AES
ORIG and DEST
ALRM
0 dB
OFF
OFF
OFF
EXT
48k
PRO
0000
ON
22