Miranda ASD-711i Notice D'installation Et D'utilisation page 12

All manuals and user guides at all-guides.com
ASD- - 711i/712i ASD 711i/712i
2.5.4 0dBFS
The three switches "SW3", "SW4" and "SW5" set the RMS value of sine wave to obtain 0dBFS
for a level adjustment set to 0dB.
2.5.5 GPI Outputs
Four open-collector GPI outputs (one for each channel) are available on the REM socket. No
current flows through one output pin when the corresponding Led is OFF (Analog signal present)
and each output sinks current if the Led is ON (absence signal or overload).
These outputs are inactive when the alarm are disabled (ALRM menu, OFF selection).
12