Nokia 6301 Guide D'utilisation page 33

A network may be hidden and can only be found by searching for its service set identifier
(SSID). An SSID is a code attached to all packets on a wireless network in order to identify
each packet as part of that network. All wireless devices attempting to communicate with
each other must share the same SSID.
Select Menu > Settings > Wi-Fi > Available networks.
1. If the Wi-Fi radio is turned off, a message asks if you want to turn on WLAN/Wi-Fi.
Select Yes.
The phone searches for available networks and, when the networks are found, they are
listed in signal strength order.
2. Scroll to the desired network, and select Connect, enter the security key and select OK.
See "Get Security Key," p. 33.
If you have not saved the network, a message asks if you want to save it.
3. Select Yes or No to indicate whether to save the network.
4. To save an available network to which you have not connected, select Options > Save.
5. To update the list of available networks, select Options > Refresh. If the list of available
networks is empty, select Refresh.
6. To locate a hidden network, select Options > Hidden networks, enter the SSID of the
network you want to find, and select OK.
7. To disconnect from the network, select Disconn..
Saved networks
The list of saved networks consists of all the networks you have saved on your phone. The name
of the network and the connection setting is displayed. The networks are listed in order of
priority and the network with the highest priority is automatically the first one where a
connection attempt is made.
1. Select Menu > Settings > Wi-Fi > Saved networks.
2. Scroll to the desired network, and select Connect.
3. If the Wi-Fi radio is turned off, a message asks if you want to turn on WLAN/Wi-Fi.
Select Yes.
A message is displayed, which confirms the network connection.
4. To rename a saved network, scroll to the desired network, and select Options > Rename.
Select Clear as many times as necessary to delete the network name, enter the new
network name, and select OK.
5. To forward the settings of a saved network, scroll to the desired network, select Options >
Forward settings, enter the security code (the preset code is 12345), and select OK. Verify
the code by entering it again, select OK and enter a phone number, and select Send.
6. To change the priority of a saved network, select Options > Organize priority, scroll to
the desired network, and select Move > Move up, Move down, Move to top, or Move to
bottom > Done > Yes.
32