Assembly Of Torch Front End Using The Speedloader (En) - ESAB SPEEDLOADER Manuel D'instruction

2.0

assembly of torch front end using the speedloader (en)

Use of a Speedloader, p/n 0558006164, will ease assembly of the torch front
end parts.
step 1. To use the Speedloader, first insert the Nozzle into the
Nozzle Retaining Cup.
step 2. Screw the Speedloader into the Nozzle Retaining Cup
to secure the Nozzle.
step 3. Secure Retaining Nut on Nozzle with Preassembly
Tool, p/n 0558005917 included with the Speedloader.
step 4. Remove the Speedloader. It is very important to
remove the Speedloader to ensure proper seating of
the remaining parts.
step 5. Insert the Diffuser into the Shield Cup.
Diffuser
step 6. Insert the Nozzle Retaining Cup assembly into the
Shield Cup Retainer.
step 7. Screw Shield Cup Retainer Assembly onto Nozzle
Retaining Cup Assembly.
Nozzle Retaining Cup Assembly
Shield Cup Retainer Assembly
19
Nozzle
Nozzle Retaining Cup
Retaining Nut
p/n 0558005916
Shield Cup
Shield Cup Retainer
englIsh
Preassembly Tool