MaxLite M Serie Mode D'emploi page 8

Operating Instructions
MaxLite LED M-Series
®
c-Max™ node Installation Instructions (Applicable only on CR models)
1.
c-Max™ USB-C receptacle (see FIG. 1).
Remove the set screw from the round
FIG. 1
3.
USB-C receptacle (see FIG. 3).
Plug the c-Max™ control node into the
FIG. 3
5.
Secure the control node in place with
Note: This is important to prevent
the provided set screw.
vandalism and shaking loose with
vibration.
© Copyright 2021. MaxLite, Inc. All Rights Reserved.
12 York Ave, West Caldwell, NJ 07006 Tel: 800-555-5629 Fax: 973-244-7333 Email: info@maxlite.com
2.
by turning it 90° (see FIG. 2).
Remove the USB-C receptacle cover
FIG. 2
4.
align (see FIG. 4).
Rotate the outer ring until the arrows
Note: This is important to seal the
fixture.
FIG. 4
M-Series
RECEPTACLE GASKET
RECEPTACLE COVER
Page: 8
REV: 06/02/21