MaxLite M Serie Mode D'emploi page 3

Operating Instructions
MaxLite LED M-Series
®
NOTE: The 75W/100W model is used in the illustrations below for demonstration purposes. Your model may vary.
Setting Color Temperature (CCT):
1. Remove the M4 hex head screws from the driver compartment cover, and open the hinge cover to access the
driver compartment (see FIG. A).
FIG. A
2. Adjust the CCT switch to the desired color temperature and close the driver compartment cover by replacing the
to prevent water leaks (see FIG. B).
screws removed in step 1. Ensure that all wires are tucked inside of the compartment and the screws are tightened
FIG. B
© Copyright 2021. MaxLite, Inc. All Rights Reserved.
12 York Ave, West Caldwell, NJ 07006 Tel: 800-555-5629 Fax: 973-244-7333 Email: info@maxlite.com
CCT
SWITCH
M-Series
Page: 3
REV: 06/02/21