Imetec TERMOFORO Instructions D'utilisation page 19

• Remove the heating pad from the tumble dryer at the end of the drying
cycle and reshape it to its original size.
• Allow the heatpad to fully air-dry before using it again.
AIR DRYING
• Lay the heating pad flat on a clothes airer until completely dry.
WARNING! Dry the appliance flat without using pegs
to avoid damaging it. Leave it to dry, laid out flat on a
clothes airer, not in direct sunlight.
• DO NOT iron the heating pad.
WASHING THE COVER (MOD.1 only)
MACHINE WASHING
• The cover can be machine washed at 40°C with a delicate cycle.
DRYING
• Dry the cover in the dryer with a delicate cycle.
• Insert the heating pad in the cover only when the cover is absolutely
dry.
• DO NOT iron the cover.
Store this appliance as follows when not used:
• Wait for the heating pad to be completely dry if previously washed.
• It is recommended to place the heating pad in the package provided
upon purchase for better storage.
• When storing the appliance, allow it to cool down before folding.
• Store the heating pad in a dry place.
Examine the appliance and its supply cord frequently for signs
of wear or damage. lf there are such signs or in the case of
malfunction, contact an authorised technical service centre.
STORING THE HEATING PAD
EN
18