Table des Matières
Publicité
EXTRACTION MODE
Aspiration unit extraction mode
The aspiration unit can be used in extracting mode or filtering mode
(optional active carbon filters kit or plasma filter kit are available).
Extracting. Kitchen fumes are expelled through the piping (not supplied with the hood)
connected to the motor discharge. The piping must never be connected to combustion
discharge pipes (stoves, boilers, burners, etc.). The use of long pipes, with many bends,
corrugated and with a diameter smaller than the motor outlet's will cause a decrease in
extracting performance and an increase in noise.
Warning! All regulations regarding air exhaust must be observed for installation.
Air should not be discharged into a duct used to discharge exhaust fumes
produced by gas combustion or other fuels (does not apply to hoods used in
filtering mode).
Filtering (recycling). The fumes pass through the carbon anti-odour filter (not supplied with the
hood) to be purified and recycled in the kitchen. The use of the carbon anti-odour filter reduces
the hood performance, we therefore recommend the hood is installed in extracting mode.
EN 26
Publicité
Table des Matières
