Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
INSTALL THE DOOR/WINDOW CONTACT
•
The gap between the sensor and magnet should be less than 10 mm.
•
If remove the two parts from each other, and the LED on the sensor lights up, then
the sensor is working properly.
•
If the two parts are close and the LED flashes rarely, it means that the battery is low.
Replace the battery.
•
The maximum transmission distance is 80 meters. The presence of obstacles
reduces this distance. Carefully choose the location of the sensor installation.
INSTALL THE MOTION SENSOR
To avoid false alarms, consider the following before installing the sensor:
•
Do not position the sensor facing the windows or doors.
10
Publicité
Table des Matières
