Humanscale M2.1 Instructions De Montage page 26

STEP 1:
Remove the plastic front cover.
STEP 2:
Remove the two side screws and
top screw from the mount and
Separate the mounting plate
from the rest of the mount.
STEP 3:
Attach the mounting plate to
a wall stud or other structural
support using the screws provided.
Mounting to drywall alone
is not recommended.
Use level to ensure that
mounting plate is perfectly
level.
STEP 4:
Align the mount with the
mounting plate on the wall.
STEP 5:
Reinstall the two side screws and
top screw into the mount and tighten.
STEP 6:
Reinstall the plastic cover.