Topcom Butler 1410 Mode D'emploi page 85

Butler 1410 Butler 1410 Butler 1410 Butler 1410
- Press the OK button or 'BACK' to return.
- Press the Menu button a few times until 'RECALL TIME' appears on the
display
- Press the OK button to change the setting or 'BACK' to return.
- The current flash time appears on the display.
- Press the Menu button to change the flash time or 'BACK' to return.
- Press 'OK' to confirm or 'BACK' to return.
4.30. Setting an exchange outside line number (PABX code)
When setting an outside line exchange number, a pause is automatically
inserted for a phone number starting with this number:
- Repeatedly press the Menu key until 'TELEPHONE' appears.
- Press the OK key.
- Repeatedly press the Menu key until 'BS SETTINGS' appears.
- Press the OK button or 'BACK' to return.
- Repeatedly press the Menu key until 'DIAL CONFIG' appears.
- Press the OK button or 'BACK' to return.
- Repeatedly press the Menu key until 'PABX SETTING' appears and press
'OK'.
- Enter the base unit PIN code (0000).
- Press the OK button or 'BACK' to return.
- 'ACCESS=XX' appears on the screen.
- Enter the outside line number (max. 2 digits) or press 'DELETE' to delete the
number.
- Press the OK button or 'BACK' to return.
4.31. Setting pause length
- Repeatedly press the Menu key until 'TELEPHONE' appears.
- Press the OK key.
- Repeatedly press the Menu key until 'BS SETTINGS' appears.
- Press the OK button or 'BACK' to return.
- Repeatedly press the Menu key until 'DIAL CONFIG' appears.
- Press the OK button or 'BACK' to return.
- Repeatedly press the Menu key until 'PAUSE TIME' appears.
- Press the OK button or 'BACK' to return.
- 'PAUSE X S' appears on the display. Repeatedly press the Menu key until the
correct number of seconds appears (1-5).
- Press the OK button or 'BACK' to return.
4.32. Changing base unit PIN code
The standard PIN code of the base unit is 0000.
All manuals and user guides at all-guides.com
85 85 85 85