Elem Garden Technic MTBT30-CC52 Instructions D'origine page 32

ASSEMBLING AND ADJUSTMENT
Picture 2
ASSEMBLY OF MIDDLE AND DOWN HANDLES .
• As fig. 2 shows, insert the middle handle to down handle until the holes match,
and then fasten the two handles by the bolts and nuts.
ASSEMBLY OF LEFT/RIGHT HANDLE
•
Match the left/right handle holes to the middle handle holes, fasten the bolts
and nuts, after that assemble the throttle wire.
• A head of throttle wire connected to the carburetor, the other head connected
to the throttle lever assembly. First, adjust the throttle lever at the bottom, and
then insert the big head of the throttle wire to the hole of the throttle lever
assembly. Put the throttle wire into the groove.
• Attention: turn the throttle lever handle for checking the startup if dissatisfied
the use, you can adjust the carburetor and the bolt.
Attention: turn the throttle lever handle for checking the startup .If dissatisfied the use,
you can adjust the carburetor and the bolt.
Picture 3