PULOX PO-200A Mode D'emploi page 17

and tender tissue.

The light (infrared is invisible) emitted from the device is harmful to
the eyes, so the user and maintenance personel should not stare at
the light.

Testee can not use enamel or other makeup.

Testee's fingernail can not be too long.

Please refer to the correlative literature about the clinical
restrictions and caution.

This device is not intended for diagnosis.
The User Manual is published by our company. All rights reserved.
1. Safety
1.1 Instructions for Safe Operations
 Check the main unit and all accessories periodically to make sure
that there is no visible damage that may affect patient's safety and
monitoring performance about cables and transducers. It is
recommended that the device should be inspected once a week at
least. In case of obvious damage, stop using the device.
 Necessary maintenance must be performed by qualified service
engineers ONLY. Users are not permitted to maintain it by
themselves.
 The oximeter cannot be used together with devices not specified in
User's Manual. Only accessory appointed or recommended by
manufacture can be used with this device.
 This product is calibrated before leaving factory.
1.2 Warning

Explosive hazard—DO NOT use the oximeter in environment with
inflammable gas such as some ignitable anesthetic agents.

DO NOT use the oximeter while the testee is being measured by
MRI and CT.

The person who is allergic to rubber can not use this device.

The disposal of scrap instrument and its accessories and packings
(including battery, plastic bags, foams and paper boxes) should
follow the local laws and regulations.

Please check the packing before use to make sure the device and
accessories are totally in accordance with the packing list, or else
the device may have the possibility of working abnormally.

Please don't measure this device with functional tester for the
device's related information.
1.3 Attention
 Keep the oximeter away from dust, vibration, corrosive substances,
EN