Black & Decker FSMH1321 Mode D'emploi page 8

ENGLISH
The lid may become hot during use.
u
Steam may escape from the appliance
u
during use.
Care should be taken when using this
appliance. DO NOT touch any parts
which may become hot during use.
Switch the appliance off and return the
u
handle to the upright position before
removing the water tank.
If steam is observed escaping from the
u
body of the hand held steam cleaner,
switch off and disconnect the unit
from the mains supply, allow to cool.
Contact your nearest authorised repair
agent. Do not continue to use the
appliance.
After use
Unplug the appliance and allow to cool
u
before cleaning.
When not in use, the appliance should
u
be stored in a dry place.
Children should not have access to
u
stored appliances.
Inspection and repairs
Unplug the appliance and allow to cool
u
before performing any maintenance or
repairs.
Before use, check the appliance for
u
damaged or defective parts. Check for
breakage of parts, damage to switches
and any other conditions that may
affect its operation.
Regularly check the power lead for
u
damage.
Do not use the appliance if any part is
u
damaged or defective.
8
(Original instructions)
Have any damaged or defective parts
u
repaired or replaced by an authorized
repair agent.
Never attempt to remove or replace
u
any parts other than those specified in
this manual.
Safety of others
This appliance can be used by
u
children aged from 8 years and above
and persons with reduced physical,
sensory or mental capabilities or
lack of experience and knowledge
if they have been given supervision
or instruction concerning use of
the appliance in a safe way and
understand the hazards involved.
Children shall not play with the
appliance. Cleaning and user
maintenance shall not be made by
children without supervision.
Children should be supervised to
u
ensure that they do not play with the
appliance.
Residual risks
Additional residual risks may arise when
using the tool which may not be included
in the enclosed safety warnings. These
risks can arise from misuse, prolonged
use etc.
Even with the application of the
relevant safety regulations and the
implementation of safety devices, certain
residual risks can not be avoided. These
include:
Injuries caused by touching any
u
moving parts.