Black & Decker FSMH1321 Mode D'emploi page 14

ENGLISH
Accessories
The performance of your appliance depends on the accessory
used. BLACK+DECKER accessories are engineered to high
quality standards and designed to enhance the performance
of your appliance. By using these accessories you will get the
very best from your equipment.
Technical Data
V
Voltage
ac
Power W
Tank
ml
Capacity
Weight kg
V
Voltage
ac
Power W
Tank
ml
Capacity
Weight kg
V
Voltage
ac
Power W
Tank
ml
Capacity
Weight kg
V
Voltage
ac
Power W
Tank
ml
Capacity
Weight kg
V
Voltage
ac
Power W
Tank
ml
Capacity
Weight kg
V
Voltage
ac
Power
W
Tank
ml
Capacity
Weight kg
V
Voltage
ac
Power W
Tank
ml
Capacity
Weight kg
14
(Original instructions)
FSMH1321
230
1300
500
2.7
FSMH1351SM
230
1300
500
2.7
FSMH13101SM
230
1300
500
2.8
FSMH13151SM
230
1300
500
2.8
FSMH1321J
230
1300
500
2.7
FSMH1321JSM
230
1300
500
2.8
FSMH1321JMD
230
1300
500
2.8
Troubleshooting
If your appliance seems not to operate properly, follow the
instructions below. If this does not solve the problem, please
contact your local BLACK+DECKER repair agent.
Problem Step
1.
The steam mop is not
turning on
2.
3.
4.
The steam mop is not
producing steam
5.
6.
7.
The steam mop stops
producing steam
during use
8.
The steam mop is
producing too much
steam during use
9.
The steam mop is
producing too little
steam during use
10.
No steam is being
produced from the
hand held steam
11.
cleaner
12.
The hand held steam
cleaner is producing
too little steam during
use
13.
14.
The hand held steam
cleaner is producing
too much steam during
use
15.
The accessories keep
falling off the unit
16.
Steam is escaping
from unexpected areas
of the unit
17.
Where can I get further
information/
accessories
Maintenance and cleaning
Your BLACK+DECKER corded appliance has been designed
to operate over a long period of time with a minimum of
maintenance. Continuous satisfactory operation depends
upon proper appliance care and regular cleaning.
Warning! Before performing any maintenance or cleaning on
corded appliances switch off and unplug the appliance.
Wipe your appliance over using a soft damp cloth.
u
For stubborn marks you can use a mild solution of soap
u
and water to dampen your cloth.
Possible solution
Check the unit is plugged in at the wall
socket.
Check the unit is switched on using the
ON/OFF switch (1)
Check the fuse in the plug.
The steam mop will only produce steam if
the hand held steam cleaner (5) is
correctly docked into the main body (11)
or the steam hose is fitted or the
is turned to ON
Autoselect TM
Check that the water tank is full. Note:
When first filled or after running dry it can
take up to 45 seconds for steam to be
produced.
Check steps 1, then 2, then 3
Check steps 4, then 5, then 3
dial (2)
Turn the Autoselect TM
anti-clockwise to reduce the amount of
steam being produced
dial (2) clockwise to
Turn the Autoselect TM
increase the amount of steam being
produced
dial (2) is at
Check that the Autoselect TM
the ON position
Check steps 5, then 1, then 2, then 3
dial (2) clockwise to
Turn the Autoselect TM
increase the amount of steam being
produced
Check step 5
dial (2)
Turn the Autoselect TM
anti-clockwise to reduce the amount of
steam being produced
Refer to the assembly chapter for correct
fitting instructions of all parts and
accessories
Refer to the assembly chapter for correct
fitting instructions of all parts and
accessories
www.blackanddecker.co.uk/steammop
www.blackanddecker.ie/steammop