Safety Instructions - VOLTCRAFT R-200 Notice D'emploi

Safety Instructions

Please read all of the operating instructions before using the product for the first
time; they contain important information about the correct operation.
The warranty/guarantee is rendered void in cases of damage resulting from failure to
comply with these operating instructions! We do not accept any liability for conse-
quential damages!
Nor do we assume liability for damage to property or personal injury caused by
improper use or the failure to observe the safety instructions! In such cases the war-
ranty/guarantee is voided.
This device left the factory in perfect condition in terms of safety engineering. To maintain this condition
and ensure safe operation, you, as the user, must comply with the safety instructions and warnings con-
tained in these instructions.
The following symbols must be observed:
An exclamation mark in a triangle shows important information in this user's manual that
has to be observed.
The lightning symbol in a triangle warns against an electric shock or the impairment of the
electrical safety of the appliance.
The "arrow" symbol indicates special information and advice on operation of the device.
This product has been CE-tested and meets the necessary European guidelines.
Class 2 insulation (double or reinforced insulation)
CAT II Overvoltage category II for measurements on electric and electronic devices which are
supplied voltage to via a mains plug. This category also covers all smaller categories (e.g.
CAT I for measuring signal and control voltages).
CAT III Overvoltage category III for measuring in building installation (e.g. outlets or sub-distribu-
tion). This category also covers all smaller categories (e.g. CAT II for measuring electronic
devices).
Earth potential
For safety and licensing reasons (CE), unauthorised conversion and/or modification of the device is not
permitted.
27