Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
operAting instructions
G
ir thermAl leAk detector "irF260-10d"
item no. 631768
intended use
The infrared thermal leak detector is used for quick inspection of thermal leaks and thermal
bridges. The measurement device warns you optically and acoustically when approaching the
set limits.
A normal/rechargeable battery (9 V block) supplies the power.
The measuring instrument must not be used when it is open, i.e. with an open battery com-
partment or when the battery compartment cover is missing. Measuring under adverse ambi-
ent conditions such as dust and flammable gasses, vapours or solvents is not admissible.
Always observe the safety instructions and all other information included in these operating
instructions.
This product complies with the applicable national and European requirements. All names of
companies and products are the trademarks of the respective owners. All rights reserved.
contents
• IR thermal leak detector
• Battery (9 V block)
• Operating instructions
explAnAtion oF the symBols
In the operating manual, an exclamation mark inside a triangle indicates important
instructions.
The "arrow" symbol indicates special information and advice on operating the device.
sAFety instructions
the warranty will be void in the event of damage caused by failure to observe
these safety instructions! we do not assume any liability for any resulting
damage!
we shall not accept liability for damage to property or personal injury caused
by incorrect handling or non-compliance with the safety instructions! in such
cases, the warranty will be null and void.
• T he unauthorised conversion and/or modification of the product is not permitted
for safety and approval reasons (CE). Never dismantle the product.
• T he product is not a toy. Therefore, be especially careful when children are
around.
Use the product where it is out of the reach of children.
• N ever use the product soon after taking it from a cold room to a warm one. The
condensation that forms might damage the product under certain circumstances.
• A void the following adverse conditions at the installation location and during
transport:
- Extreme cold or heat, direct sunlight
- Dust or flammable gases, fumes or solvents
- Strong impacts, blows
• D o not leave packaging material carelessly lying around, since it could become a
dangerous plaything for children.
• H andle the product with care; it can be damaged by impacts, blows, or accidental
falls, even from a low height.
• D o not measure through transparent surfaces or plastics. This may lead to mea-
surement tolerances.
• T he product may not be subjected to electromagnetic fields and high humidity or
liquids. Take appropriate protective measures when using outdoors.
• W hen using the laser device, make sure that the laser beam is not pointed
towards people, animals or reflecting objects.
• L aser radiation can be dangerous if the laser beam or its reflection enters unpro-
tected eyes. Therefore, before using the laser equipment, familiarise yourself with
the statutory regulations and instructions for operating such a laser device.
• N ever look into the laser beam and never point it at people or animals. Laser
radiation can cause eye injuries.
• N ever open the product. Adjustment or maintenance work may be performed only
by specialist staff. Improper handling could lead to dangerous laser radiation.
• T his product is equipped with a Class 2 Laser. Laser signs in different languages
are included in the package. If the information on the product is not written in the
®
language of your country, please affix the appropriate sign on the product.
Version 01/14
generAl inFormAtion on BAtteries/rechArgeABle BAtteries
• B atteries/rechargeable batteries must be kept out of the reach of children.
• D o not leave batteries/rechargeable batteries lying around; there is a risk that they could be
swallowed by children or pets. If they are swallowed, consult a doctor immediately.
• L eaking or damaged normal/rechargeable batteries in contact with the skin can cause acid
burns; therefore, use suitable safety gloves.
• N ormal/rechargeable batteries must not be short-circuited, opened or thrown into fire. There
is a risk of explosion.
• D o not recharge normal, non-rechargeable batteries; there is a risk of explosion!
• P lease observe correct polarity (note plus/+ and minus/-) when inserting the normal/re-
chargeable battery.
controls
1
2
3
4
1)
Indicator light
2)
LC display
3)
Button for laser
4)
"SET/REF/°C/°F" button
5)
Slide control for indicator value
6)
Button for LC display lighting
displAy reAding
A) Battery symbol
B)
Reference value display
C) "SCAN" mode
D) "HOLD" mode
E)
IR sensor for temperature display
F)
Indicator value display
G) "°C/°F" unit
inserting/replAcing the BAttery/rechArgeABle BAttery
1.
I n case of weak normal/rechargeable battery capacity, the
the display.
You should replace or recharge the normal/rechargeable battery.
2.
Open the battery compartment cover "11" carefully towards the front.
3.
R emove the discharged battery from the battery compartment "10", if necessary, and
place a new battery of the same type (see technical data) on the battery clip with the
right poles. Do not use force.
4.
C lose the battery compartment cover "11" again carefully until you hear a click. The
measurement device is ready for operation.
ATTENTION
LASER RADIATION HAZARD
DO NOT LOOK INTO THE BEAM
LIGHT-EMITTING DIODE
Wavelength: 630 - 670 nm
Max. rated output power: < 1 mW
LASER CLASS 2
EN 60 825-1:2007
5
6
7)
Laser
8)
IR sensor
9)
On/off/"HOLD" button
10) Battery compartment
11) Cover for battery compartment
B
C
D
E
7
8
9
10
11
A
F
G
"A" symbol appears on
Publicité
Table des Matières
