A&D BA-T Serie Guide De Démarrage Rapide page 12

5. IR Sensors and Auto Doors
5.1. IR sensors
BA-T series analytical balances are equipped with IR sensors that allow operation without directly
touching the balance display. At factory setting, the IR sensors on the left and right of the display are
assigned to open and close the breeze break doors. You can set
right IR sensors on and off, or change them to operate other functions.
5.2. Auto doors
BA-T series analytical balances are equipped with auto doors that allow you to open/close the breeze
break without touching the doors.
The IR sensors on the left and right of the display are assigned settings to open/close the breeze break
doors on the right and left respectively.
At factory setting, each breeze break door opens to the position it was previously opened to.
It is also possible to change which sensors the breeze break doors are assigned to and for the doors to
be fully open or partially open in the function table of the balance.
For details, refer to the separate instruction manual listed in "1.1 Detailed manuals".
Opening the breeze break door
Step 1. If you want to open the breeze break door on the left side (or on the right side) when it is closed,
hold your hand over the right IR sensor (or the left IR sensor).
Step 2. The detection buzzer sounds and the breeze break door on the left (or right) side opens.
Caution
With BA-6TE / BA-6DTE, the breeze break doors stop at the partially-open position
at factory setting.
Closing the breeze break door
Step 1. If you want to close the breeze break door on the left side (or on the right side) when it is open,
hold your hand over the right IR sensor (or the left IR sensor).
Step 2. The detection buzzer sounds and the breeze break door on the left (or right) side closes.
Operation example
Left IR sensor: Opens/closes the right breeze
break door.
Right IR sensor: Opens/closes the left
breeze break door.
EN
Example for BA-6TE / BA-6DTE
12
/ to turn the left and