Télécharger Imprimer la page

Samsung NE59J7650 Serie Manuel D'utilisation page 46

Masquer les pouces Voir aussi pour NE59J7650 Serie:

Publicité

Les langues disponibles

Les langues disponibles

Maintaining your appliance
Troubleshooting
Changing the oven light
The oven light is a standard 40-watt appliance bulb. It will come on when the oven
door is open. When the oven door is closed, press the
off. It will not work during a self-cleaning cycle.
Remove
Replace
Glass bulb cover
Bulb
46 English
pad to turn it on or
1.
Make sure the oven and the bulb are
cool.
2.
Unplug the range or disconnect the
power.
3.
Turn the glass bulb cover in the back of
the oven counterclockwise to remove.
4.
Turn the bulb counterclockwise to
remove it from its socket.
5.
Insert a new 40 watt appliance bulb,
and then turn it clockwise to tighten.
Replace the bulb cover by turning
clockwise.
6.
Plug in the range or reconnect the
power.
CAUTION
Before changing your oven light bulb,
disconnect the electrical power to the range
at the main fuse or circuit breaker panel.
Make sure the oven and the bulb are cool.
Troubleshooting
Troubleshooting
Samsung works hard to ensure that you don't have problems with your new
electric range. If you run into unexpected trouble, look first for a solution in the
table below. If, after trying the suggested solution, you're still having trouble, call
Samsung at 1-800-SAMSUNG (1-800-726-7864).
Installation
Problem
Possible cause
The range is not
The appliance has been
level.
installed improperly.
The floor is sagging or
sloping.
The kitchen cabinets are
not properly aligned and
make the range appear to
be not level.
The appliance
The kitchen cabinets are
must be
not square and too close
accessed for
to the appliance.
servicing and
Carpet is interfering with
cannot be
movement of the range.
moved easily.
Solution
Place the oven rack in the center
of the oven. Place a level on the
oven rack. Adjust the leveling
legs at the base of the range until
the oven rack is level.
Insure the floor is level and
strong and stable enough to
adequately support the range.
Contact a carpenter to correct the
situation.
Insure the cabinets are square
and provide sufficient room for
installation.
Contact a builder or installer to
make the appliance accessible.
Provide sufficient space so the
range can be lifted over the
carpet.

Publicité

loading

Ce manuel est également adapté pour:

Ne59j7651 serie