Publicité
Les langues disponibles
Les langues disponibles
Foot rest adjustment
Before use, adjust the foam leg rollers (M2) on the foot rest according to the following diagrams so
that your legs are not squeezed but still have sufficient support. To do so, pull the leg tube adjustment
knob (D2), set the desired distance and then refasten the leg adjustment knob.
Incline adjustment
You can set the incline angle between 60° and -90° as required. To do so, simply loosen the brake by
pulling the lever (O). Set the desired incline of the table and refasten the brake by pushing the lever (O).
It is important that the brake must be fully pressed through to the end, only then is a safe stop
guaranteed.
!
Make sure that neither your fingers nor clothing get wed-
ged between the frame while inverting!
O
31
L
D2
EN
Publicité
