Publicité
Les langues disponibles
Les langues disponibles
English
Socket for additional alert equipment
Extra equipment e.g. a vibrator for the ring signal can be
connected to the
socket on the back of the telephone.
((o))
Technical Information
Behind the battery cover on the underside of the telephone
you will find several switches.
These switches set technical parameters as detailed below.
Remove the small cover on the base of the telephone.
Key beep (
)
The sound that is heard when the buttons are pressed can
be switched off/on.
Microphone adaptation ( )
The microphone level may need to be adjusted for certain
people.
is the standard setting for most countries.
0
gives a somewhat higher sound and
gives a
+6
-6
somewhat lower sound.
Flash button time (100/300)
100 is the standard setting for most countries.
300 for France/Portugal.
600 for New Zealand.
Tone(♫) / Pulse(...)
Select dialling method.
The dial mode setting for UK must be Tone (Europe only).
Locking the powerful amplification (
)
The powerful amplification is set to switch off after every
call, this can be changed so the very high amplification
stays permanent switched on using the
setting. This
setting should only be activated if all users have impaired
hearing and require powerful amplification. The standard
setting is
.
Publicité
