Publicité
Les langues disponibles
Les langues disponibles
Connection
Connect the telephone cord to a network wall socket and
1.
T
to the
Connect the mains adapter to the mains power socket
2.
and to the
Connect the curly cord to the handset and to the
3.
socket on the base of the telephone. (You will hear a click
when the modular plug is correctly in place).
Set the correct
4.
on page
Lift the handset and listen for the dial tone.
5.
Date/Time
Press down
1.
Enter date (DD/MM).
2.
Enter time of day (HH:MM).
3.
Press
to cancel and return to standby mode.
Batteries
Four 1.5V type AAA batteries are needed so that caller ID,
memory etc will continue to function in the event of a power
cut. When the batteries have almost expired the
symbol will light up. Only use high quality batteries.
Check that the adapter is correctly inserted to avoid
1.
losing saved information.
Unplug the telephone cable and remove the cover on the
2.
base of the telephone.
Insert the batteries according to the markings for plus
3.
and minus terminals.
Replace the battery cover and reconnect the telephone
4.
cord.
Settings
socket on the back of the telephone.
Y
socket on the back of the telephone.
time to 100 (
Flash
).
H
until
English
see technical information
is shown.
q
7
Publicité
