Publicité
Les langues disponibles
Les langues disponibles
Projecting the
Picture
1
Power on both the unit and the
equipment connected to the
unit.
2
Press INPUT to display the input
palette on the screen.
3
Select the equipment from
which you want to display
images.
Press INPUT repeatedly or press M/m/
(enter) to select the equipment from
which to project.
Example: To view the picture from
the video equipment
connected to the HDMI
connector of this unit.
To view the picture from
Equipment connected to the
HDMI connector
Equipment connected to the
DisplayPort 1 connector
Equipment connected to the
DisplayPort 2 connector
Tips
• When "Auto Input Search" is set to "On" on
the Function
menu, only input terminals
with effective signals are displayed in the
input palette.
• When "Status" is set to "Off" or "All Off" on
the Setup
menu, the input palette does
10
GB
Projecting the Picture
• When the "Control for HDMI" is set to "On"
1
2
Press INPUT
to display
HDMI
DisplayPort 1
You can turn off the unit by holding the ?/1
(ON/STANDBY) button for about 1 second,
DisplayPort 2
instead of performing the above steps.
not appear. Press the INPUT button to switch
between input terminals in sequence.
on the Function
menu, the input terminal
with effective signals is automatically
displayed, synchronizing with the operation
of the equipment connected to HDMI input
of the unit. (Only when the connected
equipment supports Control for HDMI
compatible.)
Turning Off the Power
Press the
/
(ON/STANDBY)
?
1
button.
A message "POWER OFF?" appears on
the screen.
Press the
?
/
1
(ON/STANDBY)
button again before the
message disappears.
The ON/STANDBY indicator flashes in
green and the fan continues to run to
reduce the internal heat. First, the ON/
STANDBY indicator flashes quickly,
during which you will not be able to
light up the ON/STANDBY indicator
with the ?/1 (ON/STANDBY) button.
The fan stops and the ON/STANDBY
indicator changes from flashing green to
remaining red.
The power is turned off completely, and
you can disconnect the AC power cord.
Note
Never disconnect the AC power cord while
the indicator is flashing.
Publicité
