DeWalt DWE4557 Traduction De La Notice D'instructions Originale page 36

EnGLIsh
Package Contents
The package contains:
1 Angle grinder
1 Guard
1 Side handle
1 Flange set
1 Keyless flange (DWE4579R only)
1 Spanner (DWE4579R only)
1 Two-pin spanner
1 Instruction manual
• Check for damage to the tool, parts or accessories which may
have occurred during transport.
• Take the time to thoroughly read and understand this manual
prior to operation.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
Wear ear protection.
Wear eye protection.
Date Code Position (Fig. A)
The date code 21 , which also includes the year of manufacture,
is printed into the housing.
Example:
2016 XX XX
Year of Manufacture
Description (Fig. A)

WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
On/off switch
1
Unlocking switch
2
Spindle lock
3
Guard
4
Side handle
5
LED indicator (DWE4579, DWE4579R, DWE4597, DWE4599)
6
Lock-on button (DWE4579, DWE4579R, DWE4597,
7
DWE4599)
Intended Use
The DWE4557, DWE4597 heavy-duty angle grinders have
been designed for professional grinding, cutting, sanding and
wire brushing.
The DWE4559, DWE4579, DWE4599, DWE4579R heavy-duty
angle grinders have been designed for professional grinding
and cutting applications.
DO nOT use grinding wheels other than centre depressed
wheels and flap-disk.
34
DO nOT use under wet conditions or in the presence of
flammable liquids or gases.
These heavy-duty angle grinders are professional power tools.
DO nOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
Young children and the infirm. This appliance is not
•
intended for use by young children or infirm persons
without supervision.
• This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for their
safety. Children should never be left alone with this product.
Dust Ejection System
The dust ejection system deflects debris that would be harmful
to the motor and allows cleaner air to pass over the motor.
Overload Protection
DWE4579, DWE4579R, DWE4597,
DWE4599
The power supply to the motor will be reduced in case of motor
overload. The power will return to normal once the tool has
cooled down to suitable operating temperature.
Electronic Clutch
DWE4579, DWE4579R, DWE4597,
DWE4599
The electronic torque limiting clutch reduces the maximum
torque reaction transmitted to the operator in case of jamming
of a disc. This feature also prevents the gearing and electric
motor from stalling. The level of the electronic clutch has been
factory set and cannot be adjusted.
LED Indicator (Fig. A)
DWE4579, DWE4579R, DWE4597,
DWE4599
The LED indicator light 6 , mounted at the top of the handle,
acts as an alert to the activation of the electronic features of
the unit described above. The light will activate and maintain
a constant light when one of the above clutch or overload
features is activated. Once the unit has been reset by releasing
the switch or allowing the unit to cool the light will de-activate.
If the LED light is flashing constantly please consult your local
D WALT service agent.
e
No-volt Release Switch
DWE4579, DWE4579R, DWE4597,
DWE4599
The on/off switch has a no-volt release function. If the tool
should become disconnected from the power source for any
reason, the switch has to be deliberately reactivated.