Product Description And Specifications - Bosch GSB 13 RE Professional Notice Originale

12 | English
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is intended for impact drilling in brick, con-
crete and stone, as well as for drilling in wood, metal,
ceramic and plastic. Tools with electronic control and right/
left rotation are also suitable for screwdriving and thread
cutting.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
A)
(1) Keyless chuck
(2) Front sleeve
(3) Rear sleeve
(4) "Drilling/impact drilling" selector switch
Lock-on button for on/off switch
(5)
(6) On/off switch
(7) Speed preselection thumbwheel
(not applicable to tool model 3 601 B17 103)
(8) Rotational direction switch
(9) Button for depth stop adjustment
(10) Wing bolt for auxiliary handle adjustment
(11) Auxiliary handle (insulated gripping surface)
A)
(12) Depth stop
A)
(13) Drill chuck key
A)
(14) Keyed chuck
A)
(15) Universal bit holder
A)
(16) Screwdriver bit
A)
(17) Hex key
B)
(18) Open-ended spanner
(19) Handle (insulated gripping surface)
A) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
B) Commercially available (not included in the scope of deliv-
ery)
1 609 92A 53D | (12.07.2019)
Technical Data
Impact drill
Article number
Rated power input
Max. power output
No-load speed
Rated speed
Impact rate
Rated torque
Clockwise/anti-clockwise ro-
tation
Spindle collar diameter
Max. drilling diameter
– Masonry
– Concrete
– Steel
– Wood
Chuck capacity
Weight according to
EPTA-Procedure 01:2014
Protection class
The specifications apply to a rated voltage [U] of 230 V. These spe-
cifications may vary at different voltages and in country-specific mod-
els.
Noise/vibration information
Noise emission values determined according to
EN 62841-2-1 .
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 93 dB(A); sound power level
104 dB(A). Uncertainty K = 5 dB.
Wear hearing protection
Vibration total values a
A)
determined according to EN 62841-2-1 :
Drilling into metal: a
Impact drilling into concrete: a
Screwdriving: a <2.5 m/s
h
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
GSB 13 RE
3 601 B17 1..
W
W
-1
min 0 – 2800
-1
min
-1
min
Nm
mm
mm
mm
mm
mm
mm 1.5 – 13
kg
(triax vector sum) and uncertainty K
h
2 2
=3 m/s , K=1.5 m/s ,
h
2 2
=26 m/s , K=3 m/s .
h
2 2
, K=1.5 m/s .
Bosch Power Tools
600
301
1570
44800
1.8
●
43
15
13
10
25
1.8
/ II