Publicité
Les langues disponibles
Les langues disponibles
•
Switch to FM mode by repeatedly pressing the input source button (
•
Press and hold FM/SCAN for an automatic station scan or use
desired frequency.
You can use the USB slot to recharge any mobile devices such as mobile phones or tablets. The connection
power is 5V at 500mA.
When connecting any external players, please make sure to turn its output volume up to some extent. The
energy saving feature of the Areal Bar 70 is set to switch the device to standby after 19 minutes of no (or
too low) audio input.
The remote control does not work
Loud hum or noise
The unit does not respond when pres-
sing any buttons
No sound
I can't find the BT name of this unit on
my BT device for BT pairing
24
FM Radio
USB
Trouble Shooting
•
Use the remote control near to the unit.
•
Point the remote control at the remote control sensor on
the unit.
•
Replace the batteries in the remote control with new ones.
•
Remove any obstacles between the remote control and
the unit.
•
Maybe the plugs and sockets are dirty. Wipe them with a
cloth slightly moistened with an appropriate non-abrasive
cleaning solution.
The unit may freeze up during use. Switch off and then switch on
the unit again at the mains socket to reset it.
•
Make sure that the unit is not muted. Press MUTE or VOL +
to resume normal listening.
•
Ensure that the audio setting of the input source (e.g. TV,
game console, DVD player, etc.) is set to PCM mode while
using Optical connection.
•
Ensure that the unit is switched on.
•
Ensure that the BT function is activated on your BT device.
•
The unit has a BT function that can receive a signal within
8 metres. Keep a distance within 8 metres both devices.
) or hit FM/SCAN on the RC.
/
to manually tune in your
Publicité
