V4.0
5.
Do not allow people, mobile equipment or vehicles to pass over
unprotected power cords.
a.
Position power cords away from traffic areas.
b.
Place cords in reinforced conduits.
c.
Place planks on either side of the power cord to create a protective trench.
6.
Do not wrap cord around the tool as sharp edges may cut insulation or
cause cracks if wound too tight. Gently coil cord and either hang on a hook
or fasten with a device to keep cord together during storage.
UNPACKING
WARNING! Do not operate the tool if any part is missing. Replace the
missing part before operating. Failure to do so could result in a malfunction
and personal injury.
Remove the parts and accessories from the packaging and inspect for damage.
Make sure that all items in the parts list are included.
Contents:
•
Bench Grinder
•
Two 6 in. Grinding Wheels
(36 Grit and 60 Grit)
•
Spark Deflector
Visit www.princessauto.com for more information
6 in. Bench Grinder
•
•
•
Eye Shield Magnifying
Eye Shield
Adjustable Tool Rests x2
8706145
9