Publicité
Les langues disponibles
Les langues disponibles
V4.0
8.
Replace the side cover. Reinsert the three bolts and tighten the side cover
in place.
9.
Adjust tool rest and spark shield guard distance from the grinding wheel.
Maintain a separation of 1/8 in. or less as the wheel diameter decreases
from use.
10. Adjust the eye shield position over the grinding wheel.
11. Rotate the wheel by hand to check free movement and proper adjustments.
Many grinding wheels use removable and adjustable arbor bushings to allow
adaptation to various machine arbor diameters. Save this bushing for future use
if not needed to install the replacement wheel.
CLEANING
CAUTION! Do not use brake fluids, gasoline, petroleum-based products,
penetrating oils, etc., on the tool's plastic parts. Chemicals can damage,
weaken or destroy plastic, which may result in a serious personal injury
when the tool is in use.
Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to
damage from various types of commercial solvents and may be damaged by their
use. Use a clean cloth to remove dirt, dust, oil, grease, etc.
Electric tools used on fiberglass material, wallboard, spackling compounds, or
plaster are subject to accelerated wear and possible premature failure because the
fiberglass chips and groundings are highly abrasive to bearings, brushes,
commutators, etc. Consequently, we do not recommend using this tool for
extended work on these types of materials. However, if you do work with any of
these materials, it is extremely important to clean the tool using compressed air.
LUBRICATION
This tool is permanently lubricated at the factory and requires no additional
lubrication.
DISPOSAL
Recycle a tool damaged beyond repair at the appropriate facility.
Contact your local municipality for a list of disposal facilities or by-laws for
electronic devices, batteries, oil or other toxic liquids.
Visit www.princessauto.com for more information
6 in. Bench Grinder
8706145
17
Publicité
