Publicité
Les langues disponibles
Les langues disponibles
V4.0
9.
Do not touch an operating motor. Motors can operate at high temperatures
and can cause a burn injury.
10. Only use an accessory that exceeds the No Load Speed rating (see
Specifications).
ELECTRICAL SAFETY
WARNING! To reduce risk of electric shock, be certain that the plug is
connected to a properly grounded receptacle.
1.
Disconnect tool from power source before cleaning, servicing, changing
parts/accessories or when not in use.
2.
Protect yourself against electric shocks when working on electrical
equipment. Avoid body contact with grounded surfaces. There is an
increased chance of electrical shock if your body is grounded.
3.
Do not expose tool to rain or wet conditions. Water entering a power tool will
increase the risk of electric shock.
4.
Do not disconnect the power cord in place of using the ON/OFF switch on the
tool. This will prevent an accidental startup when the power cord is plugged
into the power supply.
a.
In the event of a power failure, turn off the machine as soon as the
power is interrupted. The possibility of accidental injury could occur if
the power returns and the unit is not switched off.
5.
Do not alter any parts of the tool or accessories. All parts and accessories
are designed with built-in safety features that may be compromised if
altered.
6.
Make certain the power source conforms to requirements of your
equipment (see Specifications).
7.
When wiring an electrically driven device, follow all electrical and safety
codes, as well as the most recent Canadian Electrical Code (CE) and
Canadian Centre for Occupational Health and Safety (CCOHS).
8.
This device is only for use on 120 V (single phase) and is equipped with a 3-
prong grounded power supply cord and plug.
a.
DO NOT remove the ground prong from the plug. This will render the
tool unsafe.
Visit www.princessauto.com for more information
6 in. Bench Grinder
8706145
7
Publicité
