Power Fist 8706145 Manuel De L'utilisateur page 11

V4.0 6 in. Bench Grinder 8706145
MOUNTING THE BENCH GRINDER
An unsecured grinder may slide or 'walk' due to vibrations when operating. The
grinder's base has predrilled holes to bolt the tool to a workbench or pedestal.
The ideal mounting position will be on a level flat surface capable of
withstanding the weight of the tool and vibrations it will cause.
Position the unplugged grinder in the chosen location. Test the location by
going through the motions of grinding various items (scissors, lawn mower
blades, knives, etc.) without power. Ensure there is enough clearance to work
with these types of objects during grinding.
Bolt the grinder to the workbench or pedestal once the location is chosen. Bolts
are not included.
OPERATION
WARNING! Inspect the grinding wheels before starting the machine for
visible defects such as fissures, cracks or chips. The wheel may break
apart and cause an injury. Replace damaged grinding wheels immediately
(See Care & Maintenance).
CAUTION! Keep your bench grinder clean by removing dust and grit from
working parts, the lower portion of the wheel guard assembly and the work
area surrounding the grinder. Dust and grit can damage the tool's internal
mechanism.
ON/OFF SWITCH
The ON/OFF switch (F) is located on the front of the grinder. Press the right side
of the switch, marked with the word 'ON', to turn the power on. Push the left
side of the switch to turn the power off.
GRINDING WHEELS
For best grinding results and maintaining good balance, always keep the
wheel(s) properly dressed.
Never force a workpiece against a cold wheel. Use light pressure until the wheel
becomes warm.
Visit www.princessauto.com for more information 11