Publicité
Les langues disponibles
Les langues disponibles
8706145
KICKBACK PRECAUTIONS
Kickback is a sudden reaction to a pinched or snagged workpiece caught in the
grinder. The workpiece can be ejected and inflict a serious injury on the user or
a bystander. Kickback can also damage the tool.
Kickback can be avoided by taking proper precautions:
1.
Maintain a firm grip on the workpiece and position your body and arms to allow
you to resist a kickback. Kickback can propel the material in the direction of the
grinding wheel's rotation.
2.
If kickback occurs, the workpiece may impact the users or bystander's
body, causing a serious injury.
3.
Use special care when working on corners, sharp edges or flexible
material.
4.
Only use grinding accessories designed for the tool.
POWER TOOL PRECAUTIONS
1.
Do not allow the tool to run without load for an extended period of time, as
this will shorten its life.
2.
Do not cover the air vents. Proper cooling of the motor is necessary to
ensure normal life of the tool.
3.
Avoid unintentional starts. Ensure the switch is off when connecting to the
power source.
4.
Disconnect the power source before installing or servicing the tool.
5.
Only use accessories that are specifically designed for use with the tool.
Ensure the accessory is tightly installed.
6.
After making adjustments, make sure that any adjustment devices are
securely tightened.
7.
Remove adjusting keys and wrenches before turning the tool on. A wrench
or a key that is left attached to a rotating part of the tool increases the risk
of personal injury.
8.
Never force the tool. Excessive pressure could break the tool, resulting in
damage to your workpiece or serious personal injury. If your tool runs
smoothly under no load, but does not run smoothly under load, then
excessive pressure is being used.
6
6 in. Bench Grinder
For technical questions call 1-800-665-8685
V4.0
Publicité
