Publicité
Les langues disponibles
Les langues disponibles
V4.0
3.
Turn the screwdriver frequently to keep both sides parallel.
4.
If ground correctly, the tip should fit completely into the screw slot with no
visible gaps.
CARE & MAINTENANCE
1.
Maintain the tool with care. A tool in good condition is efficient, easier to
control and will have fewer problems.
2.
Inspect the tool fittings, alignment and power supply cord periodically.
Have damaged or worn components repaired or replaced by an authorized
technician. Only use identical replacement parts when servicing.
3.
Follow instructions for lubricating and changing accessories.
4.
Only use accessories intended for use with this tool.
5.
Maintain the tool's labels and name plates. These carry important
information. If unreadable or missing, contact Princess Auto Ltd. for
replacements.
6.
Wheels should be dressed periodically to maintain grinding efficiency,
especially if they become clogged from grinding soft metals. Use a
grinding wheel dresser to restore the wheel's original shape.
a.
Dress the grinding wheel face only. Dressing the wheel sides can
cause it to become too thin for safe use.
7.
Keep all parts in working order. Check to determine that the guard or other
parts will operate properly and perform their intended function.
8.
A guard or other part that is damaged should be properly repaired or
replaced. Do not perform makeshift repairs.
9.
Disconnect tool when changing grinding wheels.
10. Replace a cracked wheel immediately and use only the flanges supplied
with the grinder.
11. Replacement wheels must have a minimum rated speed of 3,450 RPM and
a maximum diameter of 6 in.
WARNING! Only qualified service personnel should repair the tool. An
improperly repaired tool may present a hazard to the user and/or others.
Visit www.princessauto.com for more information
6 in. Bench Grinder
8706145
15
Publicité
