Airwell XDA Mode D'emploi page 5

REMOTE CONTROL UNIT
Operation mode
Automatic
Cooling
Dehumidification
Fan
Heating
Sleep mode
Temperature symbol
*
Not real, it is always indoor temperature
ON/OFF BUTTON
Press the ON/OFF button, in standby
mode, to turn on the air conditioner.
Press the ON/OFF button, when the
power is on, to turn off the air conditioner.
SETTING BUTTONS
FOR TEMPERATURE
- (cooler)
Press this button to decrease the set
temperature.
+ (warmer)
Press this button to increase the set
temperature.
USE THESE BUTTONS ALSO FOR TIMER
SETTING
FAN BUTTON (fan speed)
Fan speed is automatically
selected by the
microcomputer.
Low speed.
Medium speed.
High speed.
"ENERGY SAVING" BUTTON
Press this button in order to select the
energy saving function during cooling
mode.
"DRYING FUNCTION" BUTTON
Press this button in order to select
the drying function during cooling or
dehumidification mode.
"TURBO" BUTTON
Press this button in order to select the
TURBO function during cooling mode
(super cooling operation) or heating mode
(super heating operation).
DISPLAY
*
BLOW HUMIDITY
SLEEP BUTTON
Press this button in
order to select the
SLEEP mode.
Fan speed
Displayed when
transmitting data
TIMER
LIGHT
LIGHT BUTTON
Press this button in order
to switch on or off the
unit's display.
5
Temperature
indication
Timer
Flap
MODE SELECTOR BUTTON
Press this button to modify the air
conditioner mode.
(automatic)
When this setting is selected, the air
conditioner calculates the difference
between the thermostat setting and the
room temperature and automatically
switches to the "cool" or "heat" mode.
(cooling)
The air conditioner makes the room
cooler.
(dry)
The air conditioner reduces the humidity
in the room.
(fan)
The air conditioner works only as a
circulation fan.
(heating)
The air conditioner makes the room
warmer.
FLAP BUTTON
Press this button in order to switch on or
off the flap swing function.
NOT USED
TIMER BUTTON
Press this button to select the start or stop
control of timer function.
Use - or + buttons to adjust the set time
value (range 0,5-24)
DISPLAY TEMPERATURE BUTTON
Press this button to select the temperature
to be displayed (set, indoor).
EN