Rear Panel - BST UPX-460 Manuel D'utilisation

UPX-4120
15. POWER BUTTON
Press the power switch to turn the unit on. To switch the POWER off press the POWER switch again.
16. ZONE 4 MONITOR SELECTOR
Use this button to send the selected zone to the monitor output.
17. ZONE 4 VOLUME CONTROL
Use this button to adjust the output signal level for the zone 4
in left of volume control, you can find level indicator for the zone 4 output. If red led lights, that means the level is too strong and sound can
be distorded. So reduce volume level
18. ZONE 3 MONITOR SELECTOR
Use this button to send the selected zone to the monitor output.
19. ZONE 3 VOLUME CONTROL
Use this button to adjust the output signal level for the zone 3
in left of volume control, you can find level indicator for the zone 3 output. If red led lights, that means the level is too strong and sound can
be distorded. So reduce volume level
20. MONITOR VOLUME CONTROL
Use this button to adjust the monitor output signal level.
in left of volume control, you can find level indicator for the monitor output. If red led lights, that means the level is too strong and sound
can be distorded. So reduce volume level
21. HEADPHONE OUTPUT
Connect on this output an headphone to control zone signal
22. POWER LED
This led lights on when you switch the power amplifier on

REAR PANEL

23. CH1, CH2, CH3 INPUTS
Combo input, connect in this input your XLR or JACK cable, select the device (LINE, PHANTOM +15V, MIC) and adjust the signal level of
the input.
24. INPUT SELECTOR
Use this button to select the input (LINE, PHANTOM, MICRO) for each Combo input (CH1, CH2, CH3).
Select line if you want to connect a line device ( as cd player, dvd player, mixer, MP3 player,.... )
Select Mic if you want to connect a dynamic microphone
Select +15V if you want to connect a condenser mic
25. CH1, CH2, CH3 GAIN CONTROL
Use this control to adjust level of selected input
26. TELEPHONE MATRIX SELECTOR
Use these switch to select on which zone you want to send the telephone signal
Put to on the switch 1 to select zone 1
Put to on the switch 2 to select zone 2
Put to on the switch 3 to select zone 3
Put to on the switch 4 to select zone 4
© Copyright LOTRONIC 2012
BSTDJ.COM
Page 11