Front Panel - BST UPX-460 Manuel D'utilisation

UPX-460
DESCRIPTION

FRONT PANEL

1. ZONE 1 MATRIX BUTTON
Push the button to send selected input ( CH1 to CH5 ) to zone 1 output
2. ZONE 2 MATRIX BUTTON
Push the button to send selected input ( CH1 to CH5 ) to zone 2 output
3. ZONE 3 MATRIX BUTTON
Push the button to send selected input ( CH1 to CH5 ) to zone 3 output
4. ZONE 4 MATRIX BUTTON
Push the button to send selected input ( CH1 to CH5 ) to zone 4 output
5. INPUT VOLUME
Use this knob to adjust the input level for each input (CH1-CH5)
6. MUTE BUTTON
Push this button to enable mute function. Mute function cute the sound of the selected input ( CH1 to CH5 )
7. BASS CONTROL
Use this button to adjust the bass tone of the signal for each input (CH1-CH5)
8. TREBLE CONTROL
Use this button to adjust the treble tone of the signal for each input (CH1-CH5)
9. AUX INPUT
Connect on this input a line device as CD player, DVD player, MP3 player, smartphone, tablet,... Mini Jack connector
10. AUX INPUT VOLUME
Use this buton to adjust volume of Aux input
11. ZONE 1 MONITOR SELECTOR
Use this button to send the selected zone to the monitor output.
12. ZONE 1 VOLUME CONTROL
Use this button to adjust the output signal level for the zone 1
in left of volume control, you can find level indicator for the zone 1 output. If red led lights, that means the level is too strong and sound can
be distorded. So reduce volume level
13. ZONE 2 MONITOR SELECTOR
Use this button to send the selected zone to the monitor output.
14. ZONE 2 VOLUME CONTROL
Use this button to adjust the output signal level for the zone 2
in left of volume control, you can find level indicator for the zone 2 output. If red led lights, that means the level is too strong and sound can
be distorded. So reduce volume level
© Copyright LOTRONIC 2014
BSTDJ.COM
Page 10