Front Panel - BST UPA60 Manuel D'utilisation

4 • UPA60

Front Panel

1. POWER SWITCH
Use this switch to switch your power amplifier on.
2. BASS TONE CONTROL
This control is used to adjust bass tone of the main signal
3. TREBLE TONE CONTROL
This control is used to adjust treble tone of the main signal
4. MIC 1 LEVEL CONTROL
This control is used to adjust the level of the MIC 1 input.
Note : This input have a priority. That's mean when somebody talks on the microphone plugged on the mic 1
input, the level of the rest of inputs ( MIC2, AUX 1 and AUX 2 ) automatically decrease ( the level of decrease
depends to mute level setup ). When the user stop to talk on the mic 1 ( more than 3 seconds ), the level of
inputs recover their normal level.
5. MIC 2 LEVEL CONTROL
This control is used to adjust the level of the MIC 2 input.
6. AUX 1 LEVEL CONTROL
This control is used to adjust the level of the AUX 1 input
Attention : The level of this input is LINE so you can connect on this input only items with LINE level ( CD player,
Tape player, minidisc, mixer,... ). You cannot connect turntable ( phono level ) or microphone ( mic level )
7. AUX 2 LEVEL CONTROL
This control is used to adjust the level of the AUX 2 input
Attention : The level of this input is LINE so you can connect on this input only items with LINE level ( CD player,
Tape player, minidisc, mixer,... ). You cannot connect turntable ( phono level ) or microphone ( mic level )
8. MUTE CONTROL
This control is used to adjust the level of decrease for priority function. This function operates on all input (
except mic 1 ).
On the min control, the function is disable.
Inputs recover their normal level if the user stops to talk on the mic 1 input more than 3s.
9. MIC 1 INPUT
Connect on this input an microphone or the output of the wireless receiver ( Note : Micro level ).
This input have a priority. That's mean when somebody talks on the microphone plugged on the mic 1 input, the
level of the rest of inputs ( MIC2, AUX 1 and AUX 2 ) automatically decrease ( the level of decrease depends to
mute level setup ). When the user stop to talk on the mic 1 ( more than 3 seconds ), the level of inputs recover
their normal level