Trouble Shooting; Disposal Of Your Appliance; Technical Details - Montiss CVH5743M Mode D'emploi

TROUBLE SHOOTING

Symptom Possible cause
-
Poor suction
-
-
UV light not
activated
-
-
No function

DISPOSAL OF YOUR APPLIANCE

1. When this crossed-out wheeled bin symbol is attached to a product it means the product is
covered by the European Directive 2002/96/EC.
2. All electrical and electronic products should be disposed of separately from the municipal
waste stream via designated collection facilities appointed by the government or the local
authorities.
3. The correct disposal of your old appliance will help prevent potential negative consequences
for the environment and human health.
4. For more detailed information about disposal of your appliance, please contact your city
office, waste disposal service or the shop where you purchased the product.

TECHNICAL DETAILS

Model number
Power
Nominal voltage
Nominal frequency 50Hz
UV-C lamp power
UV-C wavelength
Montiss is a registered brand name of :
Van den Berg Products BV
IJzerwerf 10-12
6641 TK Beuningen
The Netherlands
www.vdbergproducts.com
24
Blocked filter
Full dust container
Vacuum cleaner not
fitted to base unit
correctly.
Safety switch not
depressed or sensors
not activated
Plug fuse failed.
CVH5743M
400W
220-240V~
8W
253.7nm
Solution
-
Remove and clean the filter.
-
Empty dust container
-
Ensure the cleaner is securely locked in
position.
-
Sensor switches only operate when the
base is level and in contact with the
surface being cleaned.
-
Check fuse by replacement with one of
the same value