Technical Specifications - Viking GE 355 Manuel D'utilisation

– Inadequately dimensioned power
cables (cross section)
– Incorrect electrical connection (voltage)
– Product modifications not approved by
VIKING
– Use of tools or accessories which are
not approved or suitable for the
machine, or are of inferior quality
– Improper use of the product
– Use of the product for sporting or
competitive events
– Resultant damage due to continued use
of the product with defective
components.
3. Maintenance operations
All operations listed in the section
"Maintenance" must be performed
regularly.
If these maintenance operations cannot be
carried out by the user, a specialist dealer
must be commissioned to perform them.
VIKING recommends that you have
maintenance operations and repairs
performed exclusively by a VIKING
specialist dealer.
VIKING specialist dealers regularly attend
training courses and are provided with
technical information.
If these operations are neglected, faults
may arise which are the responsibility of
the user.
These include:
– Damage to the motor as a result of
inadequate cleaning of the cooling air
guide (inlet slots, cooling ribs, fan
wheel)
– Corrosive and other resultant damage
caused by incorrect storage
52
– Damage to the machine through the
use of inferior-quality spare parts.
– Damage due to untimely or inadequate
maintenance or damage due to
maintenance or repair work not
performed in the workshops of
specialist dealers.

18. Technical specifications

GE 355.1 / GE 375.1:
Serial number 6011
Frequency 50 Hz
Protection class I
Type of protection Splash proof (IP
X4)
Operating conditions S6/40%
2 min
Load time
3 min idle time
Cutting unit drive permanent
In accordance with
Directive
2000/14/EC:
Guaranteed sound
power level L 100 dB(A)
WAd
Wheel diameter 250 mm
L/W/H 122/50/141
GE 355.1:
Electric motor
Engine/motor, design (~)
Manufacturer ATB
Type BSRBF 0.75/2-C
Voltage 230 V~
Power input 2500 W
2000 W (CH)
Fuse* 16 A
10 A (CH)
GE 355.1:
Maximum branch
diameter 35 mm
Nominal motor speed 2750 rpm
In accordance with
Directive
2006/42/EC:
Sound pressure level
at workplace L 94 dB(A)
pA
Uncertainty K 3 dB(A)
pA
Weight 30 kg
Weight GB 32 kg
GE 375.1:
Engine/motor, design Electric motor
(~3)
Manufacturer ATB
Type BSRF 0.75/2-C
Voltage 400 V~
Power input 3000 W
Fuse* 10 (A)
Maximum branch
diameter 40 mm
Nominal motor speed 2810 rpm
In accordance with
Directive
2006/42/EC:
Sound pressure level
at workplace L 95 dB(A)
pA
Uncertainty K 3 dB(A)
pA
Weight 31 kg
* Caution:
In the case of mains fuses of less than
16 A, these may be tripped during start-
up or in the case of high load operation
of the machine.
0478 201 9907 D - EN