Ce - Manufacturer's Declaration Of Conformity; Minimising Wear And Preventing Damage - Viking GE 355 Manuel D'utilisation

GE 355
2 On / Off switch
3 Motor
4
Capacitor
5 Safety switch
BR brown
BL
blue
BK
black
YG yellow/green
GY
grey
GE 375
6
Mains connection
7 On / Off switch
8
Motor
9
Safety switch
BR
brown
BK black
YG
yellow/green
GY
grey
16. CE - manufacturer's
declaration of conformity
We,
VIKING GmbH
Hans Peter Stihl-Strasse 5
A 6336 Langkampfen/Kufstein
declare that the machine,
Shredding machine for plant trimmings
with electric motor (GE)
Manufacturer's VIKING
brand:
Type: GE 355.1
GE 375.1
Serial number 6011
0478 201 9907 D - EN
conforms to the following EU guidelines:
2000/14/EC, 2011/65/EC, 2002/96/EC,
2004/108/EC, 2006/95/EC, 2006/42/EC
The product has been developed in
conformance with the following standards:
prEN 50434, EN 60335-1
Applicable conformity assessment
procedure:
Appendix VIII (2000/14/EC)
Name and address of relevant, named
location:
TÜV Rheinland LGA Products GmbH
Tillystraße 2
D-90431 Nürnberg
Compilation and storage of technical
documentation:
Johann Weiglhofer
VIKING GmbH
The year of manufacture and serial
number appear on the identification plate
of the machine.
Measured sound power level:
GE 355.1 97.4 dB(A)
GE 375.1 97.4 dB(A)
Guaranteed sound power level:
GE 355.1 100 dB(A)
GE 375.1 100 dB(A)
Langkampfen,
2014-01-02 (YYYY-MM-DD)
VIKING GmbH
Research and Product Development
Manager
17. Minimising wear and
preventing damage
Important information on maintenance
and care of the product group
Electric garden shredders
VIKING assumes no liability for material or
personal damage caused by the non-
observance of information contained in the
operating instructions, in particular with
regard to safety, operation and
maintenance, or which arise through the
use of unauthorised attachment or spare
parts.
Please always observe the following
important information for the prevention of
damage or excessive wear to your VIKING
machine:
1. Wearing parts
Some parts of the VIKING machine are
subject to normal wear even when used
properly and must be replaced in due time
depending on type and duration of use.
These include:
– Blade
– Blade disc
2. Compliance with the information in
this instruction manual
The VIKING machine must be used,
maintained and stored with the care
described in this instruction manual. Any
damage caused by non-compliance with
the safety, operating and maintenance
instructions is the sole responsibility of the
user.
This applies in particular to:
51