Technical Specifications - Viking ASS 125 Manuel D'utilisation

Compilation and storage of technical
documentation:
Johann Weiglhofer
VIKING GmbH
The year of manufacture and serial
number are specified on the machine's
identification plate.
Langkampfen,
2014-01-02 (YYYY-MM-DD)
VIKING GmbH
Research and Product Development
Manager

20. Technical specifications

AKD 500.2:
Weight 32 kg
Maximum coupling
load in attached state 80 kg
ASS 125.1:
Snow plough width 1250 mm
Snow plough height 450 mm
Working width in cen-
tre position 1250 mm
Working width in
angled position 1156 mm
Weight 36 kg
0478 907 9918 B - EN
Dimensions:
MT 4097.0 S/ SX, MT 4112.0 S/ SZ:
Length with coupling triangle attached:
Coupling triangle in
centre position 2261 mm
Coupling triangle in
angled position 2354 mm
Length with coupling triangle and snow
plough attached:
Coupling triangle in
centre position 2504 mm
Coupling triangle in
angled position 2705 mm
Maximum height
(lift arm in working position):
MT 4097 S/ SX
MT 4112 S 1220 mm
MT 4112 SZ 1245 mm
MT 5097.0/ G/ C/ K/ Z,
MT 6112.0 C/ K/ ZL, MT 6127.0 ZL/ KL:
Length without grass catcher box and with
coupling triangle attached:
Coupling triangle in
centre position 2390 mm
Coupling triangle in
angled position 2483 mm
Length without grass catcher box, with
coupling triangle and snow plough
attached:
Coupling triangle in
centre position 2633 mm
Coupling triangle in
angled position 2834 mm
Maximum height
(lift arm in working position):
MT 5097/ G/ C/ K/ Z
MT 6112/ C/ K: 1220 mm
MT 6112 ZL
MT 6127 ZL/ KL: 1245 mm
MT 5097.1/ C/ Z, MT 5112.1 Z,
MT 6112.1 C/ ZL, MT 6127.0 ZL:
Length without grass catcher box and with
coupling triangle attached:
Coupling triangle in
centre position 2390 mm
Coupling triangle in
angled position 2483 mm
Length without grass catcher box, with
coupling triangle and snow plough
attached:
Coupling triangle in
centre position 2633 mm
Coupling triangle in
angled position 2834 mm
Maximum height
(lift arm in working position):
MT 5097/ C/ Z,
MT 5112 Z
MT 6112 C: 1220 mm
MT 6112 ZL
MT 6127 ZL: 1245 mm
21. Troubleshooting
If necessary, contact a specialist
dealer; VIKING recommends VIKING
specialist dealers.
Fault:
MT 5097.1/ C/ Z, MT 5112.1 Z,
MT 6112.1 C/ ZL, MT 6127.0 ZL:
Starter not functioning. It is not possible to
start the engine.
Possible cause:
– The cover is not installed (when using
the snow plough).
35