Control With The Pc Software - VOLTCRAFT 513910 Mode D'emploi

12.

CoNTRoL WITH THE PC SofTWARE

Open the HCS software by clicking its icon in the start menu under "Program files > HCS". The control
command from the software will override the physical control of the power supply.
Turn on and connect the product before starting the program.
operating elements of the software and the basic operation
1 2 3
20
19
18
17
16
15
14
13
12
1. Description
2. Voltage
3. Enter symbol
4. Current
5. Enter symbol
4 5
11 10
A text field for you to put some description in.
The field where you can program the voltage to the power supply. After
inputting the value, press the enter key on the keyboard or click on the enter
symbol (3) to set the power supply.
Click to set the output voltage of the power supply according to the input in
the voltage field (2).
The field where you can program the current to the power supply. After inputting
the value, press the enter key on the keyboard or click on the enter symbol (5)
to set the power supply.
Click to set the output current of the power supply according to the input in
the voltage field (4).
6
9
7
8
49