Power Fist 8760621 Manuel De L'utilisateur page 13

V4.0 4 Ton Low Profile Floor Jack 8760621
2. Lubricate the wheel bearings and axle with grease (Fig. 12 to 14).
Fig. 12 Fig. 13 Fig. 14
STORAGE
Lower the ram to its lowest position. Apply a thin coat of lubricant to the steel
parts to avoid rust. Remove the lubricant before using the tool again.
DISPOSAL
Recycle a tool damaged beyond repair at the appropriate facility.
Contact your local municipality for a list of disposal facilities or by-laws for
electronic devices, batteries, oil or other toxic liquids.
IMPORTANT! DO NOT pollute the environment by allowing uncontrolled
discharge of waste oil.
HYDRAULIC FLUID
Do not drain hydraulic oil into the sewer system or dispose in an uncontrolled
location. Hydraulic fluid may take more than a year to breakdown in the
environment and the ingredients may still be toxic. Contact your local
municipality for proper disposal instructions or locations.
Visit www.princessauto.com for more information 13