Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
o
Press the «ON/OFF» button to start the boiling function subsequently. As soon as the
water reaches the set temperature, the kettle switches off and you hear two beeps.
Please remember that the boiling process may be interrupted briefly below 100°C by
intermediate measurements. Please wait until the boiling process is finished. That is
confirmed by the audible signal. The heating element switches off automatically and
the boiling process is stopped. The appliance can now be lifted and the water can be
used.
Boiling tea
o
Turn the lid counterclockwise to the left to loosen it.
o
Remove the tea sieve from the kettle and fill it with the desired amount of tea. An
example for filling can be found in the table below:
Filling capacity
500 ml
750 ml
1 l
o
Fill the water tank with fresh, cold tap water. When doing so, pay attention to the
level indicator, fill with at least 0.5 liters and no more than 1.0 liter.
o
Slide the tea strainer onto the pot column; it will be magnetically pulled into the cor-
rect position. Now put the lid back on and turn it clockwise to close it again.
Gebrauchsanweisung ○ Mode d'emploi ○ Istruzioni per l'uso ○ Instruction for use
Cups / teaspoon
approx. 2 cups / 2 teaspoons of tea
approx. 3 cups / 3 teaspoons of tea
approx. 4 cups / 4 teaspoons of tea
38
Publicité
Table des Matières
