Emptying The Dust Cup - shark IC160 Série Mode D'emploi

OPERATING THE VACUUM
VERSATILE FLOOR-TO-CEILING CLEANING
UPRIGHT
For cleaning carpets and hard floors. To activate
brushroll, step on floor nozzle and tilt handle back.
LIFT-AWAY® WITH WAND
Use the wand in Lift-Away mode for more reach
when cleaning above-floor areas like crown
molding or baseboards.
IMPORTANT: See the previous page for instructions on how to detach the pod, wand, and handle.
s h a r kc l e a n . c o m
UNDER FURNITURE
Use Powered Lift-Away® to reach under furniture
to clean carpets and hard floors.
LIFT-AWAY WITH HANDLE
Use the handle in Lift-Away mode for more
detailed cleaning of above-floor areas like
upholstery or window sills.
MAINTENANCE
IMPORTANT: Remove the battery before performing any maintenance. To remove, lift the
handle on top of the battery and pull up.

EMPTYING THE DUST CUP

To remove Dust Cup from pod, pinch and slide side
tabs. Tilt dust cup forward, then lift to remove.
Lint
Screen
To open top of dust cup, press upper release button
and lift handle. Remove debris from Lint Screen.
Press lower release button to open bottom of
dust cup.
To reinstall dust cup, place bottom into pod and
then tilt dust cup toward the wand until it clicks
into place.
s h a r kc l e a n . c o m