piab P3010 AVM 2 Mode D'emploi page 20

AVM™2
INSTALLATION
AVM™2 can be installed in any orientation. Ensure that the exhaust (3) from the ejector is not blocked. When
connecting supply air (1) and vacuum hoses (2) to the unit, it is important to choose proper pipe dimensions
to prevent pressure drops. Avoid restrictive inner diameters, long piping distances, sharp bends and small-
sized connections.
PNEUMATIC INSTALLATION
P3010 AVM™2
1 Compressed air G1/8", Ø6mm
2 Vacuum Ø10mm, 1/4" NPSF
3 Exhaust Ø8mm
For more detailed information see dimensional drawing.
P5010 AVM™2
1 Compressed air Ø3/8", Ø10mm
2 Vacuum G3/4", G1/2", 3/4" NPSF, 1/2" NPSF
3 Exhaust Ø16mm
For more detailed information see dimensional drawing.
20
Loosen the screws
3/4" (option 1/2")